What are the NFPA standards?

NFPA publishes more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks. NFPA codes and standards, administered by more than 250 Technical Committees comprising approximately 8,000 volunteers, are adopted and used throughout the world.

What are the features of non combustible construction that help firefighters?


  • Large structural members will support a structure for an offensive attack.
  • Load-bearing walls are noncombustible.
  • There may be floor drains to drain water used in firefighting. This feature reduces water weight and collapse potential.
  • Normally, there are no void spaces.

What are the four categories of fire departments?

What are the four categories of fire department? Volunteer. Paid-on-call. Career.

What is the most common fire ignition source of the following choices?

Welding, torch cutting, and other hot work send sparks and molten material into the air, a common reason for combustible dust or flammable liquid to catch fire. Electrical wiring that is overloaded or not installed to code can cause a spark, creating an ignition source for combustible dust and flammable liquids.

You might be interested:  Readers ask: Debris Removal And Fire Department Service Example Of What?

Is code for fire fighting piping?


636: 1988 Non-percolating flexible fire fighting delivery hose (third revision)
2871: 1983 Branch pipe, universal for fire fighting purposes (first revision)
3589: 1981 Electrically welded steel pipes for water, gas and sewage 150 to 2000 mm nominal size) (first revision)


How do you read NFPA?

How to Read the NFPA Diamond

  1. Red Section: Flammability. The red-colored section of the NFPA Diamond is located at the top or twelve o’clock position of the symbol and denotes a material’s flammability and susceptibility to catching fire when exposed to heat.
  2. Yellow Section: Instability.
  3. Blue Section: Health Hazards.
  4. White Section: Special Precautions.

Which type of construction is most fire-resistant?

The most fire – resistant buildings, Type 1 structures, are constructed with concrete and protected steel, materials that are able to withstand high temperatures for a long time.

What is the most fire-resistant building material?

These are some of the most fire – resistant building materials:

  • Concrete. Concrete is highly resistant to heat, and it is noncombustible, so it’s generally considered one of the most effective building materials for slowing down fires.
  • Brick. On an individual basis, bricks are extremely resistant to fire.
  • Gypsum.

What are the 5 types of building construction?

Buildings can be categorized into five different types of construction: fire-resistive, non-combustible, ordinary, heavy timber, and wood-framed.

What is the highest rank for a firefighter?

After the rank of firefighter, most departments progressively promote employees to driver or engineer, lieutenant, captain, battalion chief and assistant or deputy chief. A fire chief is generally the highest rank.

You might be interested:  Readers ask: Who Works At Hall County Fire Department?

What are the four basic principles of fire department organization?

The management principles of the fire service are discipline, division of labor, unity of command, and span of control.

What is the largest fire department in the world?

The Fire Department is the largest urban fire department in the world. Tokyo Fire Department.

Location Ōtemachi, Chiyoda, Tokyo, Japan
Fire Chief Toshio Andō
Budget ¥245,932,000,000 (2015)
Staff 18,408
Volunteers 26,490

What is the best defense against fires?

As always, the best defense against a fire is to be prepared. Take a moment to look at your fire extinguisher.

What is the most dangerous in terms of fire?

Class C. Fires caused by flammable gases such as butane and propane make up those in Class C, and are arguably the most dangerous given their propensity to explode. This is why such gases are sealed in fortified metal containers.

What is the OSHA standard for fire extinguishers?

NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).

Leave a Reply

Your email address will not be published. Required fields are marked *